[ Prev ]    Page:   1    2    3    4    5    6    7    8    [ Next ]

PDF version for print

Infinite Flexibility

Routing the cables in a clearly defined and well-organized manner is a given with the CMS. The cables are brought to the vicinity of all locations in the workplace that require access. Actual connection is facilitated by a number of ways, as described and illustrated below:
 
  1. Extrusion from Cable Trench grommet to extend to desktop or to workstation directly.
     
  2. Full height dry wall or any hollow-core partition can be built directly on top of the Netfloors. Cables are extended from the Cable Trench through Floor tracks of the walls, and travel inside the walls to designated locations.
     
  3. For partitions that do not allow the cables to travel inside them, cables con exit the under- floor trenches, connection con be made directly at the base of the wall.
     
  4. Netfloor utility service box SB-603 can be installed directly over Cable Trench of AD-600 system (60 mm height). And SB-403 can be installed over Cable Trench of CA-400 system (40 mm height). The box serves up 2 x 110 volts power socket and 3 x Cat. 5E or 3 x Cat. 6 data jacks.
     
  5. Multi-purpose service box can be flush mounted at the center opening of designated UniPanel. These special UniPanels con be fashioned by removing a number of the Sub-Panels of 60 mm height for AD-600 and 40 mm height for CA-400.

Extrusion from Cable Trenches through to exit at desk.

5. Multi-purpose box fixed at UniPanel by removing 4 Sub-Panels at center.

4. service box SB-603 installed at Cable Trench.


Exit-Cap   Grommet

Exit-cap is made of Flank Cap with 60 mm diameter opening. Grommet inserts at the opening. Apply Exit-cap by replacing Flank Cap. Then, extend cables from grommet to connect at partition, open plan panel, desktop and any nearest points above Netfloors.

1. Extrusion from grommet trough Cable Trench.

2. Extrusion from Cable Trenches to dry wall or de mountable partitions.

3. Extrusion from Cable Trenches to exit wall base.
 

[ Prev ]    Page:   1    2    3    4    5    6    7    8    [ Next ]

PDF version for print

Netfloor, Inc. All Rights Reserved.