[ Prev ]    Page:   1    2    3    4    5    6    7    8    [ Next ]

PDF version for print


Benefits - - - - - - - - - - - - - - - Ideal floors for office modernization

Substantial long-term cost savings and wide user acceptance and preference are the most significant benefits of the Netfloor systems. Netfloor CMS add value to on office environment with safety, manageability and flexibility features.

 

Light Weight – Adaptability
Netfloor Systems weigh 12 kg ~14 kg/m
2, about 1/3 the weight of traditional raised access floors (CRF). This is impotent when retrofitting older buildings that might not bear much extra load.

 

Safety and Manageability
The organized cable distribution system has cables going down designated routes and exiting from the Flank Caps, through grommets into modular walls, full-height partitions, or directly to the desktops. Cable Trench Caps are fully accessible and can be lifted by hand without special toots. These two features ensure safe handling by ordinary office maintenance personnel. The UniPanels (main panels) are self- standing platforms supported by pedestals that are factory- assembled. There is no chance of them collapsing and causing hazardous conditions during installation or use.

 

Cost Effectiveness
Installation mainly consists of connecting the UniPanels. There is a little trimming involved when starting the installation at a perimeter wall|. When installed one room at a time, disturbance to personnel in other rooms is minimal to none.
One installer can complete 650 to 850 SF per workday, twice as much as installing CRF.

 

Low initial cost: Average 2/3 of material and half of labor costs compared to CRF.

Low maintenance costs: Expansion and relocation costs less than 1/3 of the cast compared to CRF.

Active Reuse: In case of relocation, all components except sound attenuation blanket can be moved easily: more than 90 percent of them are reusable.

Fast and easy renovation and expansion
Because the design of Netfloors ensures fast and easy installation, renovation and expansion is just some more of that same easy process. Calling in a professional crew with specialized tools and making a major operation out of it is not in the picture. Any interference with the on-going operation in adjacent offices will be minimal. Noise level during installation is minimal.

Apply adhesives at the Sub-floor by long-hand paint roller. Apply Sound Attenuation Blanket.

Connect by Base Connector. Installation is easy and fast.

Install  the Trench Caps before or after routing cables.

Internal dry wall or de-mountable partition can be installed on top of Netfloors.

 

[ Prev ]    Page:   1    2    3    4    5    6    7    8    [ Next ]

PDF version for print


Netfloor, Inc. All Rights Reserved.